Laser Scraper
 Model CD

-Two-thirds of the dirt is carried; the remaining one-
   third is dragged.
-Dual 12L-16, 14 ply tires are used.
-High wearing parts which are easily removed for
    servicing or replacement include:
      -hub and spindle/axle assembly
      -shafts on main floor pivots
      -back frame bearing blocks
      -ball and socket on  hitch
      -side wear plates
-Replaceable, long wearing cast alloy wear plates on
    skids
-Large surface area on skid assembly eliminates "duck
    walking" and allows for faster operating speeds,
    especially when finishing.
-Floor plate can be removed for repair, if necessary.
-Floor plate does not come in contact with ground
    when cutting-only blade and skids make contact-
    making the scraper easier to load and pull.
-Hinged floor plate to adjust capacity for cutting or
    filling.

 






-Superior weight transfer to tractor design
    means more pulling capacity at a given
    horsepower.

-Single hydraulic cylinder operation ensures
    uniform and accurate up and down blade
    movement.
-Hardened replaceable spring lock bushings
    at various wear points.
-The cutting blade, a standard sized grader
    blade, is set at a more aggressive angle to
    improve cutting.
-Optional, hydraulically controlled skid plate
    adjustment.

 

MODEL CD SCRAPER SPECIFICATIONS

Model

Weight

Overall
Width

Capacity
(Heaped)

Horsepower

C-D 12 9,500 lbs. 13' - 0" 8 cubic yards 180 Minimum
C-D 14 9,800 lbs. 15' - 0" 9 cubic yards 180-225
C-D 16 10,100 lbs. 17' - 0" 10 cubic yards 180-225

 

P.O. Box 4410-501 West O'Hara Road-Anthony, New Mexico 88021-4410

Products           E-Mail         Contact us