Laser Scraper Model CDA

-Two-thirds of the dirt is carried; the remaining one-
   third is dragged.
-Dual 12L-16, 14 ply tires are used.
-High wearing parts which are easily removed for
    servicing or replacement include:
       -hub and spindle/axle assembly
       -shafts on main floor pivots
       -back frame bearing blocks
       -ball and socket on  hitch
       -side wear plates
-Replaceable, long wearing cast alloy wear
   plates on skids
-Large surface area on skid assembly eliminates "duck
    walking" and allows for faster operating speeds,
    especially when finishing.
-Floor plate does not come in contact with ground
    when cutting-only blade and skids make contact-making
    the scraper easier to load and pull.
-Superior weight transfer to tractor design means more
    pulling capacity at a given horsepower.





-Single hydraulic cylinder operation ensures
    uniform and accurate up and down blade
    movement.
-Hardened replaceable spring lock bushings
    at various wear points.
-The cutting blade, a standard sized grader
    blade, is set at a more aggressive angle to
    improve cutting.
-Hinged floor plate to adjust capacity for
    cutting or filling.
-Optional, hydraulically controlled skid plate
    adjustment.

 

MODEL CDA SCRAPER SPECIFICATIONS

Model

Weight

Width

Capacity

Horsepower

CDA-11 7,000 lbs 11' - 8" 8 cubic yards 160 hp. min
CDA-13 7,300 lbs 13' - 8" 8.7 cubic yards 160 hp. Min

P.O. Box 4410-501 West O'Hara Road-Anthony, New Mexico 88021-4410

Products           E-Mail         Contact us